An electric shower is usually connected to the mains water supply and heats water as it flows through the head to give instant hot water. Most of these showers have a built-in thermostat which maintains a constant temperature of the water. If you want to install an electric shower, you need to have adequate water pressure in your mains supply. If you do not, you can go for pumped electric showers which increases the pressure of water. Electrical showers are economical since they heat as much water as you need. The following are essential features to look for in an electric shower.
This is the part of the shower arrangement which is attached to the riser rail and emits a spray of water. There are various showerhead patterns and spray modes available in the market. The holes in the shower head which emit water determine the spray pattern. The use of more holes produces a wider spray pattern. Using the inner holes results in a forceful narrow jet of water.
When choosing a shower head, go for those that are easy to clean. Rub-clean rubber nozzles are the best as they are easy to clean and check for limescale buildup which can cause blockages.
You will find electric showers with different power ratings. This affects the performance of the shower. Showers with higher power ratings are capable of heating higher volumes of water than those with lower power ratings for same mains supply pressure. Power rating is measured in kilowatts. You will find electric showers with ratings of between 7.5kW and 10kW.
Showers with higher power ratings consume more power than those with lower ratings. Therefore, you need to select one as per your needs. Ensure also that the wiring in your house is compatible with the power rating of the shower.
The raiser rail is the vertical metal rod which remains attached to the wall and enables you to adjust the height of the shower head. It is advisable to go for longer shower rails that offer more flexibility. Some shower rails have soap cases or hooks to place your shower gel or soap conveniently.
Ease of Installation
If you have a shower already installed in your bathroom, then you have to completely remove it before installing a new shower. However, to make the installation process easier and less costly, go for showers that are similar to what you used before. The wiring and power rating should also be the same as that of your previous model. This way it will be easily integrated into your bathroom without having to make significant changes in the circuit and wiring of the bathroom.
The water pressure from the main supply needs to be considered when looking for an electric shower. This is because it goes a long way in defining your experience when using the shower. If the mains supply has low water pressure, you can opt for pumped electric showers to increase the water pressure.
Regardless of the electric shower, you choose, always ensure you get a qualified professional during installation and maintenance of the shower. Look out for these features when searching for an electric shower. Visit https://www.bestelectricshower.com/ for more on electric showers.